GEM Litho celebrates local surf culture and craftsmanship.
George & Eddie Medel
LITHOGRAPHICS

Los Angeles Riverside San Bernardino San Diego
OVER
50 YEARS
EXPERIENCE
GEORGE has been in the industry for over 30 years. Starting as a feeder on press and working his way up to Plant Manager for Quebecor World & Grafikom and also General Manager for Mico Printing & Packaging. Other companies he worked with were: Upper Deck, Kellow Brown, Standard Paper Box, Dot Printer, & Precision Litho (as part of Consolidated Graphic corp.) EDDIE has been in the industry for over 24 years. Started in the printing industry in ‘87, and later developing into journeyman table film stripper. Further his career by being certified on the Mac & PC. Some of the companies he has worked for were: Kellow Brown, Dot Printer, Graphic Depot Inc, KC Photoengraving.
offset printing
Press
Our Offset Printing will give you the ability to print on any stock from 60lb. to 28pt. We also print on challenging substrate such as: foilboard, plastic, and static cling. And with our inline coater we are able to further enhance your printing with gloss, satin, soft touch, as well as metallic coating.
diecutting
Cut
Our die cutting is geared for the shorter runs which gives us the ability to get those smaller jobs done without incurring large cost and sacrificing the quality of your projects.
folding and gluing
Seal
For folding and gluing, our production line adopts a vacuum adsorption belt conveyor. When it comes to enclosing or protecting products for distribution storage, sales and use, we ensure a strong bond is maintained for the integrity of each carton.
CREATIVE PACKAGING
Any Industry

box dieline

box samples
Sheet Size :
Up to 20” x 28”
Materials :
Board Types
SBS (Solid Bleached Sulfate)
CCNB (Clay-Coated Newsback)
CNK (Coated Natural Kraft)
Silver Metallic Board
Plastic Sheets
Litho Label Paper
80# C1S Litho Label
100# C1S Litho Label
Gloss Text
Book Offset
Coating :
Full Coverage or Spot
Aqueous
High Gloss / Satin / Matte
Offline UV
High Gloss / Matte

reverse end tuck top box
RETT
Reverse End Tuck Top

Is a box with top and bottom closing flaps placed on opposite sides of the packaging. The box is popped open from either the top or bottom, with both flaps being closed after the product is inside. The box is glued on one side. These boxes make good economic sense and are able to be stocked closely together. However, a weak cut edge on the front panel can run into window material when closed.
Category
Trays
reverse tuck end box
RTE
Reverse Tuck End

Same as a STE but the custom reverse tuck end ends tuck and lock on opposite panels. The custom RTE is a more cost effective chipboard box than an custom STE due to the fact that you can have more boxes print on a sheet.
Category
Tubes
standard reverse tuck box
SRT
Standard Reverse Tuck

The joint on the Standard Reverse Tuck carton is located at the seam along the right side panel, in the rear. The closure panels on top and bottom swing in opposite directions, with the bottom folding in the rear and the top folding in front. This carton can be assembled either manually or by automation. With a friction lock closure on top and a slit lock tuck closure on bottom, as shown here, the carton is easy to open and close, while remaining unlikely to open inadvertently at its base.
Category
Tubes
standard straight tuck box
SST
Standard Straight Tuck

This style is suitable for products requiring a primary display panel with a large window. With fold/tuck closures in the back, the raw edges at both ends of the front display panel are concealed. The Standard Straight Tuck also obviates any interference between the window film material and the tuck, which might occur if a reverse tuck style were to be used. This carton is suitable for manual assembling, as well as automated assembling and closing applications.
Category
Trays
tuck top snap lock bottom box
TTSLB
Tuck Top Snap Lock Bottom

Same as a TTAB but the bottom is not pre-glued. The custom tuck top snap lock bottom has four flaps that are folded and locked to form the bottom. It has a stronger bottom vs. the auto bottom, less expensive to manufacture, but takes longer to assemble.
Category
Trays
walker-lock tray box
WLT
Walker-Lock Tray

Formed from a single piece of combined board, the design features an unbroken bottom, and several layers of corrugated in the end panels. Trays are not shipping containers, but they are frequently used as inner containers for parts, delicate produce, letter mail and other products, or as elements of display stands.
Category
Trays

YOUR PROJECT












QUOTE
GEM Lithographics
1524 East Francis St. Ontario, CA 91761

(909) 947-5522
box anatomy